Ask questions and get answers from experienced industry professionals
Solar shingles are expensive and unproven. I recommend Sun Power photo voltaic solar. An average home is $20,000 to $30,000 and the return on investment is 4 to 6 years on a 25 plus year system.
Well according to Elon Musk yes they are but I'm not sure you can get hold of teslas new shingles or get a price on them yet. But if you haven't checked them out, check out the YouTube video on tesla's new roofing
Let's hear it for Elon Musk and his efforts to move the solar industry forward! Solar shingles have lots of potential. Hopefully, Tesla and Solar City will get it right. We used solar shingles about 15 years ago when installing a new roof and encountered some issues: 1) They were expensive! I would recommend getting a quote for both traditional PV panels versus the shingles and see what pencils out. The cost of PV has come down significantly in the last couple of years. Once you get the quote, be sure and compare the cost/efficiency/performance ratios of the two systems. 2) Maintenance can be an issue. There are more electrical connections with a roof shingle system vs a traditional PV system. More things to create potential problems. The shingles are typically installed in "strings" - where mulitple shingles work together in units. If one shingle has a problem, the entire string "goes down". Check to see how Solar City addressses this issue: can you easily identify where the bad shingle is and be able to replace it easily? Otherwise the efficiency of your system is compromised significantly. Another maintenance issue is keeping all the shingles clean. There is more work to wash down an entire roof periodically to remove dirt buildup than there is for a traditional PV system. 3) Availability: Is Tesla/Solar City providing the units in Atlanta? It may take them some time to gear up their distribution and train people to install them properly. Both important things to consider.
All that being said, it certainly makes sense to have your roof generate power for you! Regardless of whether you go the traditional PV system or shingles route. Best of luck!
Use plumbing soder that comes in a roll. Break off a piece and put in the hole then put the screw back in.
I am assuming it is a standard steel entry door handset. If the screws are not striped, simply tighten the screws as you would on any entry or passage set.
Are you a building professional?
Why not answer these questions like a pro?Sign up free