Ask questions and get answers from experienced industry professionals
A professional deck builder with industry knowledge will be able to help answer all your questions such as what size deck is allowed in your town, different configuration ideas and other available options. You can visit our website and contact us with any questions you may have. Here is our site: www.fourseasonssunrooms.com/decking
Ask Your Wife First!!! Happy Wife Happy Life... and Hire a professional Do Not attempt this under taking witht he amout of recon and intel You have provided here.
here are a few industry terms
Deck Building Terms
Here are some of the terms you'll need to know to complete this project:
Beam: A horizontal support member (Also see post.)
Decking: The material installed over the supporting framing members to which the roofing material is applied
Edge: Either of the two longer sides of a board, perpendicular to the face
Face: Either of the two wide surfaces of a board
Footing: The base on which a masonry wall or other support rests. It spreads out the load to prevent settling
Joists: Horizontal framing members that support a floor or ceiling.
Pilot Hole: A small-diameter hole that guides a nail or screw
Post: Any vertical support member
Rim Joist: The outermost joist in a structure's floor framing
Rise: The vertical distance from one point to another above it; a measurement you need in planning a stairway or ramp (Also see run.)
Run: The horizontal distance a ramp or stairway traverses (Also see rise.)
Screed: Leveling concrete, sand or other material by pulling a board pipe or other straightedge across it in a sawing motion
Three-Four-Five Triangle: An easy, mathematical way to check whether a large angle is square. Measure 3 feet along one side, 4 feet along the other. if the corner is square, the diagonal distance between those two points will equal 5 feet.
Toenail: To drive nails at an angle.
Consult a professional.
Whether it's 12" or 12' off the ground there are too many safety and code issues for the average homeowner to tackle. Better to do it right than to regret it later.
Are you a building professional?
Why not answer these questions like a pro?Sign up free