Show All
Show Answers
Show Open Questions
Show Most Popular

Professional Building Services

Oct 7, 2019
Oct 19, 2019

Yes - make sure you have a good base when you cut out the area to be widdened. The base is as important (if not more) than the amount of asphault you put down as a top coat.

Aug 2, 2018
Sep 23, 2018

The pictures were very helpful - thank you.  It looks like only the first ply/layer came apart which is not optimal but minimal risk for coming apart allowing the ridge vent to come off especially if they used every nail hole during installation. The bug barrier appears to be intact and the breakage of the plywood would not interfere with that.

Jan 11, 2018
Feb 11, 2018

I agree with Chris.  The Cost vs Value report is the "go to" guide and is impartial.  Personally, I like to focus on first impressions and curb appeal.  Exterior dressings like corwn mouldings and simple shrub pruning is a great low cost way to give the home a wow factor.

Apr 8, 2016
Apr 10, 2016

This time of year, we start receiving panicked emergency calls for leaky roofs that failed during the tough winter season. Most roofs fail long before their anticipated lifespan and not just because of their age.

Main reason? Improper attic insulation or ventilation prevents the continuous airflow of outside air into the attic. When ventilation is done right, there is a continuous airflow up through the soffits continuing through the ridge or mechanical vents. This helps during the warm summer months when attic temperatures can reach well over 130 degrees, as well as during the winter during that horrible “ice dam” building season.

The goal is to balance the airflow and temperature protecting the valuable living areas below. A good rule of thumb is one square foot of attic ventilation for every 300 s.f. of attic space. IE: If your attic is 1200 s.f., you’ll need a total of 4 s.f. of ventilation split equallywith 2 feet in the soffit/eave and 2 feet out the ridge or mechanical vents. This will ensure good airflow through the attic.

We all know of those dreaded ice dams ! Having the right amount of insulation keeps the heat where it should be, in your living area! When you do not have proper insulation, it allows the warm living space air below to rise making the attic warmer. The result is melting snow turns into water, water then runs toward the eave where it re-freezes creating ice dams. Water then builds up under the shingles and you know the rest of the story – wet ceilings, walls- a total mess.

We’ve seen all sorts of problems including mold, mildew growth, plywood deflection, curved shingles, wood rot, frame rot, etc.

Short term, the easiest way to keep your heating/cooling bills down and minimize your likelihood of an ice dam is to have proper insulation and attic ventilation. Long term, you’ll be extending the lifespan of your roof and preventing expensive repairs.

Are you a building professional?

Why not answer these questions like a pro?

Sign up free