Without question you should invest your money in Fiber Cement Siding for the following reasons:

1. Authentic and more tranditional appearance.

2. Better fire rating.

3. Does not fade like vinyl.

4. Higher Return on Investment. 

5. The ability to paint your house should you choose, down the road.

6. Will not warp, buckle or move on the walls.

7. The trim finshes that can be achieved with Fiber Cement are not possible with vinyl.

How would you like to have been the last person on your block to have bought Aluminum Siding 30 years ago?  That is the reality of today's exterior cladding market.  The vinyl industry is scambling but have yet to come up with a viable alternative to Fiber Cement. There are some new composites that are starting to make inroads but they are still too costly and are in limitied profiles.

Be sure to choose a Perfered James Hardie Contractor so you know all the best practices will be followed in accourdace with the manufactuere's specifications.

Unlike vinyl, Hardie Board needs a skilled craftsman to insure a propoer and long lasting installation.

Michael Damora

K & B Home Remodelers 

This time of year, we start receiving panicked emergency calls for leaky roofs that failed during the tough winter season. Most roofs fail long before their anticipated lifespan and not just because of their age.

Main reason? Improper attic insulation or ventilation prevents the continuous airflow of outside air into the attic. When ventilation is done right, there is a continuous airflow up through the soffits continuing through the ridge or mechanical vents. This helps during the warm summer months when attic temperatures can reach well over 130 degrees, as well as during the winter during that horrible “ice dam” building season.

The goal is to balance the airflow and temperature protecting the valuable living areas below. A good rule of thumb is one square foot of attic ventilation for every 300 s.f. of attic space. IE: If your attic is 1200 s.f., you’ll need a total of 4 s.f. of ventilation split equallywith 2 feet in the soffit/eave and 2 feet out the ridge or mechanical vents. This will ensure good airflow through the attic.

We all know of those dreaded ice dams ! Having the right amount of insulation keeps the heat where it should be, in your living area! When you do not have proper insulation, it allows the warm living space air below to rise making the attic warmer. The result is melting snow turns into water, water then runs toward the eave where it re-freezes creating ice dams. Water then builds up under the shingles and you know the rest of the story – wet ceilings, walls- a total mess.

We’ve seen all sorts of problems including mold, mildew growth, plywood deflection, curved shingles, wood rot, frame rot, etc.

Short term, the easiest way to keep your heating/cooling bills down and minimize your likelihood of an ice dam is to have proper insulation and attic ventilation. Long term, you’ll be extending the lifespan of your roof and preventing expensive repairs.

We at NEWPRO have a alternate view from our industry colleague, Mr. Damora. Since the greatest concern you voiced was the lack of insulation in your extension, we recommend Vinyl Composite Siding, also know as Insulated Vinyl Siding. 

Hardie Plank is a cement board; it's composition is sand and water. It is heavy on the wall and provides no insulation value. Formed to resemble wood, it fails to provide a deep, rich grain and does not come close to the look of wood. It is highly susceptible to mold and mildew. Hardie Plank has many seams and the seams must be sealed or water can infiltrate behind the siding. It can crack and if it does, you must tear the whole wall down in order to replace just one plank. It also is not maintenance free and requires painting every 10 years.

Insulated Vinyl Siding solves all of the aforementioned problems. It has high R-value, some up to 5.3, and has the potential to yield an 80% return on investment due to the increased energy efficiency and lower energy bills. You can learn more about this from the highly respected Remodeling Magazine's Cost to Value 2014 Report.

Additional benefits of Insulated Vinyl Siding include:

• Having a deep, rich grain and a real wood look
• There are less seams, which are water-tight
• It rarely ever needs painting
• It is mold and mildew resistant
• There are far less installation problems and less likely to need repairs.
• If repairs are needed, its easy to replace a single panel. 

I hope this information is helpful. Being located in Massachusetts, we didn't get nearly as rough of a winter as the Chicago area, but we can certainly understand why you put insulation so high on your Siding Needs List! 

All the best,

Michelle Slowe

NEWPRO

I would start with making sure your attic has adequate ventilation. 

The most cost effective things that you can do to improve your homes energy efficiency will depend on the existing condition of your building envelope, the efficiency of your equipment, and humiditiy control.

Addressing the condition overhead and tightening the building envelope are basic principles involved in maintaining efficient temperture control in the home. Thermal imaging will clearly indicate areas of major heat loss.

There are many types of structures and styles of thermal barriers. Therefore, you are best advised to have an energy consultant from a Home Energy Rating Service HERS evaluate of your particular home and assist in identifying the weakness of your home envelope and machanical equipment. Such a report  can provide you with a roadmap to begin taking steps to improve the overall efficiency of the home. 

Hello Alex, 

One alternative that most homeowners are not aware yet is reviewing your Roofing System. Along with the attic insulation, the type of roof you have can make a huge difference on how energy efficient your home is.

Most roofing materials (especially asphalt composite roofs) absorb solar energy and transfer heat to your home (requiring more air-conditioning during summer). On the other hand, energy efficient Metal Roofs are reflective and emissive. They bounce most of the sun's visible and UV light - meaning less heat transferred to your home. Independent studies show energy savings of up to 25%.

The Interlock Metal Roofing System is Energy Star certified (US only). More than energy efficient, our roofs are truly sustainable, being made of up to 95% recycled material, reducing the dependence of asphalt and stopping the cycle of old roofing material going to landfills. It is a lifelong solution that is better for your home, your pocket and the planet.