It depends on how much storage you need, how you access it, available space between joints and ground and is area conditioned? Do you have some pictures and rough dimensions?

Before you do anything new...look at what is already there. 

1. Do the existing windows allow drafts?  Upgrade existing windows first before considering new windows.  I don't think the payback is that great over existing windows that are properly maintained. 

2. Is the header serviced annually?  Change the filter monthly (there are so cheap), check all the ducts for breaks and tape them up.  Walk around the house when the heater(s) are on and check the temperatur in each room.  When you have done your homework then have a profeswsional come in.

3. Seal around the ceiling can lights on the second floor that are allowing heater air into the attic. 

4. Replace the seal around all your exterior doors.  This is really the case on the door from the garage to the house. 

Start there \Philp Anderson HDR Remodeling Berkeley CA

Many great answers here regarding insulation and air sealing.  If you have a pool, also look into upgrading your pump to a variable speed pump.  They run at lower RPM for filtering than they do for vacuuming.  This can be a significant saver in energy costs... and as always, GO SOLAR!

Solare Energy has been serving San Diego for 25 years and provides our customers with a free energy audit and rate analysis before designing a solar panel system for their homes.  This allows us to accurately size the system to your energy consumption needs and get you the best value for your investment.

Learn more at www.SolareEnergy.com or call 858-547-4300 for San Diego area solar installations.

Rob Shaw
Marketing Manager
Solare Energy, Inc.
San Diego, CA

When issues arise during a project we view them as "Bumps in the Road" instead of them being "Road Blocks." If you have hired the correct contractor, they have probably seen the issue before and it can be fixed. If there truly is a road block it is because the contractor didnt prepare the client or the job specifications well enough before they started construction. This is their fault and you can't call a customer difficult for their own mistakes. If you see something that bothers you bring it up right away. It's ok to bring up any issue you have because that will ultimately decide your satisfaction with the project.

When we feel a customer is difficult though is when during construction they say, "Well we didnt realize the product would look that way!" If you are not comfortable with something or you are not sure how something will look, be sure to ask before starting construction! A lot of times it is too late because you signed a contract or the product has already been installed. If you have signed with us we think you know exactly what you are getting. Never just settle if you are uncomfortable.

In summary, like any good relationship a successful project is all about communicating effectively. The design portion of a project is like dating. When you sign a contract your married. So if you dont feel you can ask your contractor questions or if when you ask you dont get a satisfactory answer, dont get married because divorces can be expensive! If you can communicate effectively with your contractor when putting a project together you will have a positive relationship during construction.

I say insulation should be at the top of your list. I would also take a look at your water pumps.

Here's a few of the items we actuallyp ersonally suggest when going green: http://xtremegreenhomes.com/green_options.php.

We have written on good bit on this subject: Please take a look at these blogs we wrote!

http://blog.akatlanta.com/2010/11/10-mistakes-not-to-make-when-heating.html

http://blog.akatlanta.com/2010/11/7-winterization-tips-to-keep-your-money.html

I have yet to survey a home that didn't need additional insulation and more importantly....air sealing. 

While HVAC systems are typically older in most homes that we audit, every home that I have ever been in leaks too much air and much, much more than is required.

Air Sealing and Insulation would be #1 and #2 on my list.  After that, items like HVAC and windows will jockey for position depending on the condition of both. 

When it comes to energy efficiency, adding insulation is the most affordable upgrade that can be done to a 2-story home. With good insulation, there will be an immediate return on the money spent. A high performance energy efficient heating system is also very important. Energy efficient heating and good insulation work hand in hand by paying the homeowner back hundreds of dollars a year, along with the home being much more comfortable to live in. Lifetime aluminum metal roofing should rank very high on the priority list for an energy efficient home; certainly among the top three upgrades. The product itself is made from a very high percentage of post consumer aluminum. It is also considered to be among the most long lasting sustainable roofs that can be put on a home.There are aluminum roofs that are well over 100 years old in the USA. These roofs have very high reflectivity, which equates to high energy savings during the summer months or in the south where air conditioning is needed. These energy star rated roofs can save as much as 30% on energy as it relates to cooling costs. With proper insulation, energy efficient heating, and metal roofing, the home will have optimum energy efficiency and continue to remain at the most comfortable temperature based on the given seasons.

The first thing to reduce energy is to see where it is being wasted.

 An energy audit with blower door test and infared camera is the best place to start. 

 The list of upgrades range from adding insulation, to replacing HVAC systems and everything in beteen, such as new windows and doors to installing smart theromstats. But because each home is different and has different needs the only way to be sure your upgrades are right for your home is to start with an energy audit.