Texas also has a 3 day RoR.

In MA we have the three day right of recession policy. Our contracts have a Notice of Cancellation document that is in NCR form. The homeowner mails or faxes back a signed copy within three days. 

If your document is unreadable which to me is a warning sign I would call them and ask them what to do and send an email cancelling as well. 

If you have any further questions you can call me at 978-304-0495. Hope I was able to help you.

Stepahnie Vanderbilt 

www.mycoastalwindows.com 

Windows and doors are the largest culprit in lost of energy efficiency. It may not be the cheapest option but will provide you with the largest impact.

Use plumbing soder that comes in a roll.  Break off a piece and put in the hole then put the screw back in. 

I am assuming it is a standard steel entry door handset.  If the screws are not striped, simply tighten the screws as you would on any entry or passage set.

Christofer, There is a lot written about your particular condition. What I would do would be to install a spray polyurethane insulation (closed cell insulation) into the attic ceiling and down to and including the eaves. this installed over a 1/4" plywood that would be "cleated" down at a minimum of 1" below the bottom of the roof sheathing, thus eliminating the "hot roof" situation. As far as moisture... if you understand that warm air rises and carries the moisture up (another reason i would use a closed cell product) then it makes sense to foam any walls or kneewalls as well. The venting on the top side would not be to eliminate any interior moisture, but to make your shingles last longer (keep them from overheating). Quite a few asphalt companies have disclaimers on warrantees because of this issue. You would need to check with your steel roof manufacturer how they respond to a hot roof application. 

Ok so you don't really want all that moisture collecting on your windows and or finished wall substrates in the attic. So an ERV/HRV or even the furnace fan run continuously would help distrubute or evacute the excess moisture if this is your main house furnace (air handler). FYI- change filters monthly in these systems to help mitigate possible mold issues. I recommend the 6" combustion air (bringing in dry outside air) code required in IRC. I am not sure if this furnace unit in your attic is the primary furnace (air handler) for the home. If so that would help distribute attic moisture to the lower parts of the home. If separate attic unit only, I'm not thinking it will ever distribute moist warm air to the lower level like you suggest.

Remember this... once you start changing the function of your home's ventilation/conditioned or unconditioning of a space you will be changing the whole dynamics of how the house used to function. Henceforth do your homework. All this said...I run my company business in the extreme temperature zone of Minnesota. Your local heating guys should have a better handle on providing a safe living environment for your family. Mold can be a serious issue.  

We've done this application numerous times in southeastern PA with one subtle change, we use closed cell foam insulation directly against the underside of the roof sheathing. Open cell will continue to let air/humidity through, closed cell will not. Since air can't move through the closed cell foam there isn't any need for air flow under the roof sheathing because there won't be any humidity there to potentially condensate. Air already moves through the fiberglass insulation and that won't change when the Attic becomes conditioned space. I believe it would be best to remove ALL of the existing fiberglass ceiling insulation so that the Attic space becomes 'one' with the rest of the House. Fresh air intake to the fossil fuel furnace is necessary. It should be set up with a power damper that opens when the furnace turns on to allow combustion air directly to the heat chamber. When the furnace isn't running the damper is closed to keep unconditioned air out of the Attic.

Dennis D. Gehman, CR, MSA, CLC, CKBR, GAC, CAPS

President

Gehman Design Remodeling

NARI = National Association of the Remodeling Industry

CR = NARI Certified Remodeler

MSA = CertainTeed Master Shingle Applicator

CLC = NARI Certifled Lead Carpenter

CKBR = NARI Certified Kitchen & Bath Remodeler

GAC = Green Advantage Certified

CAPS = Certified Aging in Place Specialist

Make sure that your attic is properly insulated.  Make sure the seals around all windows and doors are in good shape.  If you can see daylight air is entering and leaving as well.

http://www.houselogic.com/home-advice/tax-credits/how-to-collect-tax-energy-credits/

I do not believe that would qualify. Only the materials qaulifies for the credit.

From what I've found online it does not qualify unfortuantly.

"The credit applies to improvements such as adding insulation, energy efficient exterior windows and energy-efficient heating and air conditioning systems."

Here's a link to where I found the info: http://www.irs.gov/uac/Newsroom/Energy-Efficient-Home-Improvements-Can-Lower-Your-Taxes