In my personal home which has high quality windows, we also suffered condensation. We generate moisture by breathing, cooking, and bathing. If you have casement windows with screens on the inside, you might be surprised just how much those screens prevent convection airflow and keep cooler air closer to the window glass. We solved the problem in our home using a combination of 3 actions.

1) We remove our window screens every winter.

2) We open our window shades all the way every morning and leave them open all day long.

3) We have timers on our bathroom fans and run them for about 4 hours per day in addition to the 10 or 20 minutes of bathing time.

4) Bonus: We always run our kitchen vent fan when we are cooking to remove moisture (and odors) from the house.

I hope that helps. In the end, it's all physics. It's about the dew point, which is the surface temperature at which the relative humidity condenses. It can happen with cheap or expensive windows.

By the way: If there is air leakage around the window, this is going to exacerbate the problem. So doing a call-back to the installer or a 3rd party energy-rating company would help if the other solutions don't work.

In MN. we have the same 3 day right to rescind. This is standardized form (written legibally) in type 10 bold letter type. My understanding, it is required to be given to the client if contract you sign is in the homeowners residense. Not if the contract is signed in the our company's office. We give it to our clients either way. The 1st day starts the day after you sign and is counted daily except for weekends and holidays. 

The real issue is... if you are having 2nd thoughts about being in contract with a particular contractor. I am thinking that I as a contractor, I would certainly need to know the issues, even if after "3 days right to rescind" has passed. I typically don't order product for any project until the time period has passed. If you want to get out of your contractoral obligations, there should not be any financial obligations from your part if contract is legally rescinded according to the form and in an appropriate time period. If after there may be some fees as your contractor may have spent time to proceed with your material and scheduling process for your project. 

Hope this helps.

We suggest Simonton Vinyl Replacement windows to all our customers. They are very energy efficient and work flawlessly. I will show a customer a lot of the times how I can open the window with ease with my pinky finger. It's hard to say how much you will save on your energy bill. There are a lot of factors involved. If you currently have a well insulated home and low energy bill you probably won't save that much. If your home isn't that well insulated and large energy bills it will show up more there. I use the example of my grandfather alot. He replaced his windows with Simonton about 10-15 years ago. They have a small 3 bedroom ranch and were having utility bills of $3-400 a month. They replaced the windows and the bill came down to $100 a month. If you are having a hard time keeping your rooms cool in the summer and warm in the winter, you will see a drastic difference in your comfort level along with the power bill. Another reason we offer Simonton is the affordability. We typically install a 5050 replacement window turnkey around $400 per window. Of course there are reasons this can go up, but typical install is on average this price. I would suggest going to simonton.com and searching for an experienced installer in your area. Hope this helps! Good luck with your search. 

Bryan-

If you mean that the walls are 2 x 4 and framed already below the screens and you just want to replace the screens with windows, then you have a few options depending on your budget.

The most expensive we've done involved replacing the screens with Pella Designer Series casements and picture windows with miniblinds inside the glass.  A picture window with blinds can be made up to 59 inches wide, and a casement that will crank open has a maximum frame width of 35 inches.  That customer was very pleased with the result, and he had budgeted extra for the premium windows. Figure $1200 to $1500 per opening for that option.

The least expensive we've done involved Pella Impervia fiberglass sliding windows and we installed a couple of 6 foot wide 2-panel units and a couple of 9 foot wide 3-panel units.  They are strong, look like painted wood not vinyl, are energy-efficient and offer a lot of ventilation.  Unlike the casement windows that crank out and are somtimes problematic with backyards or walkways nearby, sliders can be opened with no projection.  Figure about half as much to do that.

Of course you can use single or double-hung windows but it would take 2 or 3 to fill the opening that a single slider can, and the slider will give you more visible glass and the same ventiliation.  The customer that used the sliders lived across from the beach, and he actually removes the venting panel from each of his sliders for the summer and puts it back in for the winter.  However he had a pretty wide overhang to keep out the summer rains.

As far as the A frame you can of course install triangular shaped windows to let light in and keep the cold out.  Consider something with a stronger Low-E coating in the glass to keep out the sun's heat. 

All of the above of course might require beefing up the framing below and between the windows to accept the extra weight over the screens.

Good luck with your project!

Joe

Supplies needed: 

hopper gun and compressor (available for rental at home-center stores), paint tray, paint suit and glasses, stepladder , putty knife, paint mixer, paint roller, masking tape, drop cloths, ceiling texture, primer sealer, spackle

Here are the steps you need to take to get the job done: 

1. Fill any dents or imperfections in the ceiling with spackle, and then apply a coat of primer with a roller. Allow the primer to dry at least four hours.

2. While it's drying, mask off the walls and floor with masking tape and tarps, plastic sheets or drop cloths. 

3. Wearing proper protective clothing and goggles, pour some texture mix into a large bucket and mix according to directions. Use a paint-mixer attachment to achieve a nice blend. The mixture is ready when it's the consistency of thick porridge.

4. Fill the hopper with texture mixture and fire up the compressor. Practice spraying on an old board or a large piece of cardboard to get the feel of the machine.

5. Lightly spray the mixture onto the ceiling, and keep moving to avoid oversaturating any area. Use multiple light coats and allow the texture time to dry between coats. If you spray the texture on too thickly, it will drip off the ceiling.

You must have paid without inspecting the work. Building code requires a weather barrier under the siding and that it be taped at openings and all seams. Was there a permit obtained to do the work? If not, did your locality require one. If they did, report the contractor to the inspection department  as having not pulled a permit and gotten the right inspections. They may be able to help you and it oculd be a license violation in your state. Although most will refuse if a permit was not obtained and the proper inspections performed. Maybe they will go after the contractor and have them make it right. Have you checked your ceiling insulation? Heat rises and if the attic is not properly insulated(This is where 2/3 of the heat escapes from a house.  and  the soffits(overhang)need to be  vented. Heat will escape through the roof. How about your windows. Caulking around the j- channels where it meets the frame may stop some air and water infiltration.Do this with a clear caulking made for that purposed.  A lot of heat escapes through windows if they are not properly sealed. You may be able to put some plastic film over the windows and inside casings like 3-M. This may also help you with heat loss. There are foam inserts that you could put in the electrical outlets by removing the cover screw ,,pulling the cover,  putting them in place and then puttng the screw back in. Maybe the walls should have been insulated while you had the siding off. There are many things you havent't told us but these are ideas that may help your situation. It sounds like you do not have a foundation with blocks. But they are also a souce of heat loss. If you do, you could insulate the rim joists with a high density foam sheet and cut them to fit. and then use caulk or spray foam to seal around the edges. Hope this helps you.  

When you are looking for a professional contractor to successfully bring your home remodeling project to life, you need to make sure you do your homework.

Below are 6 things to consider before hiring a contractor:

1.What is their track record? How long have they been working in the area?

Check out the home remodeling companies you are considering on the Better Business Bureau’s website as well as other sites like Angie’s List. Read testimonials on review websites and look over company websites for portfolios and comments from past clients.

2.What are their credentials? Are they licensed? Bonded? Insured?

States set their own requirements about licenses, but most states have an agency that homeowners can contact to confirm a contractor’s license and credentials. Ask for proof of bonding to make sure your contractor is current on his/her credentials. Insurance puts the liability on the contractor if something goes wrong during the project. Not all insurance is created equal, make sure to ask for a copy of their insurance certificate to verify they have General Liability, Workers’ Compensation, and Auto coverages.

3.Do they have references? Will they provide you with a past client list?

Use a past client list to talk with the people your client has worked with before. Ask them if the contractor delivered what was promised on time and at the agreed upon budget. Also ask about how easy or difficult it was to communicate with the contractor.

4.How will they communicate with you? How do you reach them after hours?

Make sure you agree on how you will communicate with your contractor and if you need weekly in person meetings to get your questions answered.

5.Will they be getting all the required building permits for the project?

While the homeowner pays the cost of the building permits, the contractor should be the one responsible for obtaining the permits.

6.How will the payment schedule be arranged?

For replacement work never pay the entire amount before the project starts. Payment schedules vary from company to company, but there is usually a deposit and payment installments based on certain stages of completion.

Just as you are asking questions about your contractor, your contractor will be asking questions about you and your home remodeling project. It is important that you are aware of the questions your contractor should NOT be asking you.

Sometimes a contractor is trying to find out information about a project, but he/she may phrase questions in a way that makes the homeowner feel uncomfortable.

Listed below are some questions your contractor should NOT ask you:

1.Are you widowed?

2.Do you have money in your savings account?

3.How much money do you make?

4.Will you be alone when I arrive?

5.What is your credit score?

6.May I see your other bids before I present mine?

In Angie Hicks’s article, “3 Questions Your Contractor Shouldn’t Ask,” from Angie’s List she explains how home improvement contractors can be more tactful when they request information from clients.

Check out the article here: https://www.angieslist.com/articles/3-questions-your-contractor-shouldnt-ask.htm

Most states do have a 3 day right of recison. This allows a customer to cancel a contract without any penalties and or fees within 3 business days of contract. However in most cases that rule does not apply and the law does not apply if you have invited the contractor over and or if you have gone to their place of business. This law was put in place for the high pressure door knockers. 

Again if you set up an apointment with a contractor and invited them to your home the 3 day does not apply.

That said if there is a real good reason, car accident, unforseen expsences etc. most contractors will allow you out of a contract even if after 3 days. 

Lastly please keep in mind usually 30% of the cost of the job is actually before the job has started, marketing, commisions, adminstration etc. etc. 

I hope this helps.

Tim Brown RGS Exteriors and Contruction

www.utahgutter.com

801-280-3110

John Ford, There are an abundance of energy efficiency upgrades you can do to your 2-story home. A question to your question - do you have a small or a larger budget? Small budget - 2 options: Attic Insulation or A Foil Energy Barrier, one example is Green Energy Barrier. Blown-In Attic Insulation is inexpensive and can help with an additional R-value of 18-60 in your attic. A Foil Energy Barrier - can be placed along the rafters or floor boards and is a foil used by NASA that greatly assists with energy efficiency. Larger budget - 3 solid options: Solar panels, Replacement Windows with Krypton gas, or Insulated Siding, an insulation with a system R-value of a 4.2 that contours to your siding panel. Best, Ken 

The materials are just 30% of the cost.  They are labor intensive and if you are fairly handy you can save a bundle of money doing it yourself.  However, this is not a task for the average DYI.  If you hire someone to supply and install the system you can plan on spending $3,000 and up depending on the size of your closet.  

In most homes, the neccesity of new windows does not usually crack the top 3 in terms of energy efficiency improvements.

You can usually get more efficiency mileage and bang for your remodeling dollar from othere retrofits (air sealing, insulation, etc.).

That being said, insulation does not improve the visual resale of the home or make the home prettier from the curb.  Windows have tangible impact on resale and on brightening up the home's exterior.

One thing that is never accounted for in energy modeling when comparing existing windows to replacement windows is the net improvement in air tightness.  This improvement can often times supercede the impact on the homes efficiency as compared to the total unit R-value improvement. 

I am assuming your home is ducted and has a forced air system.  If you you only have 1 furnace and 1 condenser, it my be more energy effecient to expend to two units.  I recommend Lennox.  You can also look at installing spilt units like these made by Fujitsu:

http://www.fujitsugeneral.com/products.htm

These are designed so that you can cool a room/rooms individually.  I suggest calling a few licensed HVAC contractors and get 3 quotes.

We always suggest clients spend some time on Pinterest first to narrow down their ideas since there are so many options available.  You don't want to discover what your budget will allow by spending endless hours confusing material selection with company selection.  Next, research online and find 3 good companies to interview, narrowing your search down to one.  It is an involved process so you have to have chemistry with the person you work with.  Make sure they will be available throughout the process, not just for the sale.  Consider all components to the kitchen: appliances, cabinetry, heating sources-gas, electric etc, flooring, flow & lighting.